Home
Home Articles FLIR(PGR)相關問與答 (FAQ) FLIR(PGR)產品更動通知 Product Change Notifications (PCNs)


下表整理FLIR(PGR)2013-2017年在產品上所做的相關更動,

各項更動的詳細資訊請點選PDF檔,提供給有使用到相關產品的客戶做參考。

完整的歷年更動清單可直接參考原廠網站:http://www.ptgrey.com/support/product-change-notifications

 

 

Point Grey產品更動通知 Product Change Notifications (PCNs)

PCN2017002 - Point Grey rebranding to FLIR — 02/06/2017

Point Grey was acquired by FLIR Systems in November 2016. Beginning May 2017 Point Grey products will begin to use the FLIR name and logo in an ongoing changeover. Part numbers will remain unchanged.

Point Grey2016/11FLIR收購,2017/5開始更換產品logo,型號則不變

PCN2016003A - Update to DEVKIT-01-00007 — 06/02/2016

The Ladybug5 devkit has been updated to include a 1m USB3 cable and 1 port USB3 hub.

Ladybug5 配件包更新,新增1M USB3傳輸線和單埠USB3 hub

PCN2016001A - FL3-U3-88S2C-C Discontinuation — 01/03/2016

The IMX121 sensor manufactured by Sony has gone End of Life, and as a result FLIR will no longer be able to provide this product.

FL3-U3-88S2C-C停產,替代型號為FL3-U3-120S3C-C

PCN2015013A - ACC-01-1201 change — 09/10/2015

FLIR will be switching from IOI U3-PCIE1XG204 to IOI U3-PCIE1XG205. The host adapters use the same Renesas µPD720202 chipset.

ACC-01-1201產品更換

PCN2015011A - FL2G-50S5 Firmware Support — 08/07/2015

A hardware change will be applied to the FL2G-50S5. The new camera hardware is not backwards compatible with older firmware.

FL2G-50S5零件更換,新出廠相機需搭配韌體v0.9.3.20

Flash Memory512 KB增加至1 MB

PCN2015010A - FL2G-13S2 Firmware Support — 07/28/2015

A hardware change will be applied to the FL2G-13S2. The new camera hardware is not backwards compatible with older firmware.

FL2G-13S2零件更換,新出廠相機需搭配韌體v0.9.3.20

Flash Memory512 KB增加至1 MB

PCN2015008A - USB3 Connector Improvement — 07/02/2015

This change is to provide additional strength and support to the USB 3.1 connector. This change will not impact the fit or function of the products.

USB 3相機連接埠強化

PER2015001A - ACC-01-1202 Cable lock position change — 05/12/2015

The screw locking configuration on ACC-01-1202 has been changed. Refer to the included table for details.

擴充卡螺絲孔位更動

PCN2015005A - BFLY-PGE-13S2 Frame Rate Increase — 03/31/2015

In firmware versions 1.46 and later, the BFLY-PGE-13S2’s frame rate has been increased from 22fps to 30fps. Cameras are still compatible with older versions of firmware.

BFLY-PGE-13S2搭配韌體V1.43開始支援至30FPS

PCN2015004A - FL3-U3-13Y3 Firmware Support — 02/25/2015

A hardware change will be applied to the FL3-U3-13Y3. The new camera hardware is not backwards compatible with older firmware.

FL3-U3-13Y3零件更換,切確時間待後續更新

PCN2015001A - FL3-U3-13E4 Firmware Support — 01/14/2015

A hardware change will be applied to the FL3-U3-13E4. The new camera hardware is not backwards compatible with older firmware.

FL3-U3-13E4零件更換,新出廠的相機需搭配韌體v2.15

PCN2014017A - FL3-U3-13S2 Firmware Support

A hardware change will be applied to the FL3-U3-13S2. The new camera hardware is not backwards compatible with older firmware.

FL3-U3-13S2零件更換,新出廠的相機需搭配韌體v2.14

PCN2014015A - Grasshopper 3 GPIO Change

A change has been made to the Opto-isolated output in the GPIO of GS3-U3 and GS3-PGE cameras.

GS3-U3 & GS3-PGE GPIO opto-isolated output零件更換

PCN2014013 - FL3-U3-32S2 Firmware Support

A hardware change will be applied to the FL3-U3-32S2. The new camera hardware is not backwards compatible with old firmware. All new cameras will start to ship with new firmware in February 2015.

 FL3-U3-32S2零件更換,20152月後出廠的相機需搭配韌體v2.12

PCN2014011A - U3-PCIE2-2P01 Discontinuation

As part of Point Grey’s on-going product lifecycle management process the U3-PCIE2-2P01 using the Fresco FL1009, will be transitioned to “End of Life” status. The recommended replacement U3-PCIE2-2P01X, features the Fresco FL1100 host controller.

 USB 3.0擴充卡U3-PCIE2-2P01停產,新款U3-PCIE2-2P01X採用新型晶片

PCN2014010A - Change of IEEE-1394a Host Adapter ACC-01-1000

The IEEE-1394a Host Adapter included as a stand-alone accessory and in some of our dev-kits has been replaced with an equivalent model.

 IEEE-1394a PCI擴充卡更換使用晶片

PCN2014008A - Glass window Change for Monochrome Cameras

Change in protective glass window for Monochrome cameras with 1" sensors.

 黑白相機(1sensor)的保護玻璃鏡片材質更換

PCN2014007A - IR Filter Window Change

The protective glass windows used with 1" format color cameras are being changed to a new material. This change will affect color camera models with 1" sensors.

 彩色相機(1sensor)的紅外濾片材質更換

PCN2014005A - Logo improvement on camera cases

The process for applying the Point Grey logo to the camera case has been improved, resulting in a visible difference. This change has no impact on the form, fit, and function of the camera.

 相機機身Logo印刷

PCN2014003A - Grasshopper2 GigE Firmware Support

A hardware change has been applied to the Grasshopper2 GigE. The new camera hardware is not backwards compatible with old firmware. All new cameras will ship with new firmware.

GS2-GE零件更換,未來出廠的相機將搭配新版韌體 (序號/日期待更新)

PCN2014002A - Blackfly GigE PoE GPIO Change — 03/18/2014

A change has been made to the Opto-isolated output in the GPIO of BFLY-PGE cameras.

BFLY-PGE opto-isolated output零件更換 (201412~)

PCN2013025A - Discontinuation Of FWB-EC-2PORT — 12/18/2013

The IEEE1394b ExpressCard FWB-EC-2PORT has been discontinued by Point Grey.

FWB-EC-2PORT ExpressCard停產

PCN2013014A - Chameleon Firmware Support

A hardware change has been applied to these part numbers. The new camera hardware is not backwards compatible with firmware 1.16 or older. All new cameras will ship with firmware 1.17.

 Chameleon PCB板更換,新板出廠搭配韌體v1.17

PCN2013015A - Camera and Box Label Change

Several changes has been made to the camera label and box label of Point Grey cameras.

 相機包裝與外盒標籤相關更動

PCN2013013A - Grasshopper Camera Casing Change

The Grasshopper, Grasshopper2, Grasshopper3 and Grasshopper Express camera families will be manufactured with casted aluminium.

 Grasshopper系列外殼材質更換

PCN2013011A - End of Life Notice for Dragonfly, Dragonfly Express, Firefly2,and Scorpion

Dragonfly, Dragonfly Express, Firefly2, and Scorpion camera families have entered "End of Life" status.

 Dragonfly(DRAG-XXX)Dragonfly Express(DX-XXX)Firefly2(FIRE2-COL-XXX)Scorpion(SCOR-XXX)將於201312月底停產

PCN2013010A - Ladybug5 development kit host adapter component change

The development kit currently ships with a USB 3.0 PCI-e host adapter card. Point Grey is updating the USB 3.0 PCI-e host adapter card in the development kit.

 Ladybug5配件包USB 3.0擴充卡更換

PCN20130007A - Flea3 FL3-U3-13S2 and FL3-U3-32S2 Firmware Support

A hardware change has been applied to these part numbers. The new camera hardware is not backwards compatible with firmware 1.40 or older. All new cameras will ship with firmware 1.41.

 FL3-U3-13S2FL3-U3-32S2零件更換,出廠搭配韌體v1.41

PCN2013005A - IR Filter Window Change

The protective glass windows used with color cameras are being changed to a new material. This change will affect color camera models. 

 所有彩色相機的紅外濾片材質更換

PCN2013003A - Discontinuation of ACC-01-1200

The generic USB 3.0 PCI Express 2.0 host adapter card ACC-01-1200 is being discontinued and replaced by ACC-01-1201.

 USB 3.0擴充卡ACC-01-1200停產,新款ACC-01-1201採用新型晶片

PCN2013002A - Discontinuation of ProFUSION 25

The ProFUSION 25 camera array system will be discontinued effective immediately.

 ProFUSION 25停產

PCN2013001A - Addition of Plastic Screws in ACC-01-0003

Additional screws are now provided in ACC-01-0003. The silver screws are to be used plastic housing cameras. The black screws are to be used with metal housing cameras.

 銀色螺絲適用塑膠外殼機種,黑色螺絲適用金屬外殼機種

PCN2012011 - Glass Window Change for Monochrome Cameras

Change in protective glass window for monochrome cameras.

 所有黑白相機的保護玻璃鏡片材質更換

 

更新日期: 2017/2/14

 


一寶實達有限公司 為加拿大FLIR Integrated Imaging Solutions台灣總代理
德國 Jenoptik ProgRes 高階顯微鏡攝影機總代理
加拿大LMI 智慧雷射感測器掃描器台灣總代理
23584  新北市中和區橋和路120號7樓之5 - TEL︰02-2249-0011 Fax︰02-22490091 - E-mail︰mail@apostar.com.tw
  Copyright © 2015 APO STAR CO., LTD. - All Rights Reserved.